Overview

Farrow & Ball Full Gloss is an ultra high gloss water-based paint offering a durable and versatile finish that can be used on interior & exterior surfaces. With a 95% sheen, this robust high gloss finish combines elegance and practicality, providing water-resistant, long-lasting protection and a glamorous, reflective finish for various surfaces including wood, metal and even walls & ceiling, making it a popular choice for front doors. It provides a flexible finish that moves with the painted surface to avoid flaking, peeling and fading for up to 6 years*. Thanks to its water-based formula, Full Gloss is quick-drying, low-odour, low VOC and toy safe, a better choice for you and for the planet.

Ultra-glossy finish: 95% sheen
Full Gloss is Farrow & Ball highest sheen finish
Offers a flexible & breathable finish
Protects exterior wood & metal through changing weather
Long-lasting colour - up to 6 years*
Low odour & Low VOC

Tinted Colour Information

Tinted paint is custom mixed in house at Next Day Paint using our Farrow & Ball tinting machine. We mix the paint on site, which means we can offer our usual fast delivery with no extra delay. Tinted Colour Match paints can't be cancelled or returned as they are tinted to order.

Area	Interior & Exterior
Recommended Use	Front doors, interior walls & ceilings, interior & exterior woodwork & metal, Furniture. Not suitable for use on plastic. Not suitable for exterior decking or other pressure treated wood.
Base	Water-Based
Coverage	Up to 12m2 per litre
Drying Time	2 hours
Re-Coat Time	4 hours
Recommended Coats	2 Coats
Application Method	Brush, Spray
VOC Levels	Low
Clean Up	Remove as much product as possible from the equipment before cleaning with water

Preparation

Ensure all surfaces are sound, clean, dry and free from dirt, grease and other contamination.

For most surfaces it is recommended to use a dilute Sugar Soap solution following the manufacturer's instructions. We do not recommend using solvent-based cleaning products or strong alkaline solutions as these can impact adhesion.

After cleaning, wipe the surface with a damp cloth and allow to dry.

When opening a new tin of paint, don't allow any dust or debris to fall from the lid into the continents. If you are reusing a tin of paint, it is recommended to strain it.

Knotty or Resinous Wood Preparation:

Heat the knot to draw out any excess resin (we recommend using a hot air paint stripper).
Scrape off any residue resin, and then thoroughly clean the area with white or methylated spirit. Allow the area to dry thoroughly before continuing.

New and Unpainted Interior Wood (Not Floors) Preparation:

Fill any cracks, holes and open joints with an appropriate filler.
To improve the paint's adhesion, lightly sand the surface.
Prepare any filled, knotty or resinous areas as above and patch prime with
Apply one coat of in the correct colour tone for your top coat. Allow a minimum of 4 hours drying time between coats.
Apply two coats of your chosen Farrow & Ball finish, allowing the correct drying time between coats.

Previously Painted Interior Wood (Not Floors) Preparation:

Remove any areas of old paint which are peeling or blistering as flaking or peeling can occur if you paint over weak paint layers. Blend and 'feather' the edges of areas of old paint, as this helps to smooth out the surface.
Fill any cracks, holes and open joints with an appropriate filler.
Lightly sand the surface to improve paint adhesion.
Patch prime any filled or bare knotty / resinous areas with .
Apply one coat of Farrow & Ball Wood Primer & Undercoat, in the correct colour tone for your top coat (and allowing a minimum of 4 hours drying time between coats).
Then apply two coats of your chosen Farrow & Ball finish, allowing the correct drying time between coats.

Exterior Bare Wood Surface Preparation:

Fill any cracks, holes and open joints with an appropriate filler.
To improve the paint's adhesion, lightly sand the surface.
In environments where wood rotting fungi is likely to occur, treat with exterior wood preservative prior to priming.
Prepare any knotty or resinous areas as above and patch prime with .
Apply one coat of , in the correct colour tone for your top coat, and allow a minimum of 4 hours drying time.
Apply two coats of your chosen Farrow & Ball finish, allowing the correct drying time between coats.

Please note: Not suitable for exterior decking or other pressure treated wood.

Exterior Previously Painted Wood Surface Preparation:

Remove any areas of old paint which are peeling or blistering as flaking or peeling can occur if you paint over weak paint layers. Blend and 'feather' the edges of areas of old paint, as this helps to smooth out the surface.
Fill any cracks, holes and open joints with a water-based exterior wood filler.
Lightly sand the surface to improve paint adhesion.
In environments where wood rotting fungi is likely to occur, treat with exterior wood preservative prior to priming.
Prepare any knotty or resinous areas as above and patch prime with .
Apply one coat of , in the correct colour tone for your top coat (and allowing a minimum of 4 hours drying time between coats).
Then apply two coats of your chosen Farrow & Ball finish, allowing the correct drying time between coats.

Please note: Repeatedly repairing cracks, holes and open joints in a surface may indicate that the surface is nearing the end of its life and will require additional effort to maintain it. If this is the case consider renewal or replacement.

Find out more information about the preparation of various surfaces on the "Product Advice Sheet" in the "Datasheet" section.

Application

Always test a small area of the surface to be painted to ensure you are happy with the finished results

Stir thoroughly before use.
Ensure all surfaces are sound, clean, dry and free from dirt, grease and other contamination. Please note that flaking or peeling may occur if you paint over weak paint layers - to avoid this sand back any previous weak paint layers before you start painting.
Where required apply suitable Farrow & Ball Primer & Undercoat to improve paint adhesion and promote depth of colour.
For most applications, a quality fine-tipped synthetic bristled paint brush or medium pile woven polyester roller is recommended. However, where an optimum finish is required, brush application using a fine-tipped, synthetic bristled brush is recommended. It is not recommended to apply Full Gloss by roller to large areas such as walls and ceilings as a decrease in sheen level and a slight surface texture (stippling) may be visible.

Find out more information about the Application on the "Product Advice Sheet" in the "Datasheet" section.

Always follow manufacturer's instructions found on the tin

For the very best results, Farrow & Ball always recommend using a Farrow & Ball Primer & Undercoat.

Recommended Primer & Undercoats:

For use on wood:
For use on metal:
For use on interior walls & ceilings:
For use to patch prime unsound masonry surfaces : Farrow & Ball Masonry & Plaster Stabilising Primer

Aftercare & Storage

Protect from frost and extreme temperatures.

It is recommended to use this product within 6 months of purchase therefore, we are unable to accept responsibility for the deterioration of contents or packaging after this date.

Full Gloss is washable, wipeable & stain resistant. Wipe gently with a soft damp cloth or sponge. Some cleaning solutions may mark the surface. Test on an inconspicuous area before use. Do not use bleach-based cleaning productsAs is standard for all decorative paints, we recommend that you leave a period of 2 weeks for the paint to fully harden or 'cure'. During this time, it is a good idea to treat the area with care and avoid using harsh cleaning.

Find out more information on the "Product Advice Sheet" in the "Datasheet" section.